Description
Lektro-Tech S is the 5th and most recent formulation combining both corrosion preventative compounds (CPC?™s) and lubricants. (There are approximately 15,000 chemical substances registered in the CAS system DAILY.) This new 5th generation product uses the most recent and innovative of these compounds to provide the most superior product on the market. The combination of ingredients provides protection against moisture, chlorides, acid vapor and other environmental contaminates over the range of types of corrosion. It uses Nano sized particles of PTFE that are deposited into very small mechanical close-tolerance voids while providing a low coefficient of friction lubrication for sliding parts. It dries on contact leaving a dry, no odor thin film of protection. Lektrotech-Tech S cannot be washed off with water, has a wide temperature service range and can be applied without special equipment or instruction.

Application
Lektro-Tech S was developed for applications where superior protection from the degradation effects of moisture, general.vibration and fretting corrosion, static electricity, and corona are desired.

Lektro-Tech S may be applied by brush, dip, swab, spray or by spraying from self-pressurized containers. When spraying, apply light spray from 12 inches moving first in a left to right motion then an up and down motion. Metal has grains and spraying or brushing in two directions ensures complete coverage. More is not better, a thin spray is all that you will need. Lektro-Tech S is non-flammable and is classed as an Ultra Thin film of 0.20 millimeters that can be applied to any mechanical close-tolerance component or equipment.

Lektro-Tech S is a true hydrophobic, self-healing and thermally stable formulation that will not run, pool, harden, freeze or attract contaminates.

Packaging
Lektro-Tech S is available in the following package styles; Aerosol Pressurized spray containers and bulk re-sealable single quart and gallon containers, 5 gallon pails and 55 gallon drums.

Specifications
Lektro-Tech S meets the performance requirements of MIL-DTL-87177. Type I & II Grade B

Material Characteristics

Lektro-Tech S is classified as a dry lubricant and will not slump. Coverage is a non-tacky thin film with a very low vapor pressure, which does not readily pick up debris or evaporate.

The film has a very low surface tension, which results in good coverage, is hydrophobic and self healing. Lektro-Tech S is non-flammable even when sprayed in aerosol form. Large dielectric constant. Lektro-Tech S eliminates electromigration when tested on fine-line solder coated copper patterns, and is non-hazardous to user.

Please email for availability and price.

(LEKT00001890)

Performance Limits Test Method Lektro-Tech S
Dryness 0.0100 gram (max) 4.5.1 <0.0100 g
Flash Point 243C (470F) (min) ASTM D 1310 Not applicable
Dielectric breakdown 25,000 volts (min) ASTM D 877 >25,000 volts
Lubricity 1.20 mm wear scar diameter (max) ASTM 2266 2/ <1.20 mm
Residue soluble trichlortrifluorethane No visible residue 4.5.2 PASS
Oxidation stability Less than 5 pounds per 100 hours ASTM D 942 PASS
Corrosion No evidence of corrosion on the resistance base metal 4.5.6 PASS
Sprayability Sprayable 4.5.7 PASS
SKU LEKT00001890
Brand Lektro-Tech
Shipping Weight 0.6600kg
Unit Of Measure Gallon
Mil Specification MIL-DTL-87177. Type I & II
Pack Size 16 OZ AEROSOL
Hazmat Yes
OEM Part Number S-16
Available in Australia;Singapore;New Zealand;India;Sri-Lanka;UAE;Bangladesh

Be The First To Review This Product!

Help other ASG CORPORATION PTY LTD users shop smarter by writing reviews for products you have purchased.

Write a product review

We Also Recommend
Lektro-Tech S - 1 Gallon

Lektro-Tech S - 1 Gallon

$461.81

Lektro-Tech S - 5 Gallon Pails

Lektro-Tech S - 5 Gallon Pails

$646.54

Lektro-Tech S - 55 Gallon

Lektro-Tech S - 55 Gallon

$2,355.25

More From This Category
KIT: PRIMER,2GL,DESOTO SPEC, SUPER KOROPON

KIT: PRIMER,2GL,DESOTO SPEC, SUPER KOROPON

$521.16

266D-GL Thinner for spray applied cellulose nitrate

266D-GL Thinner for spray applied cellulose nitrat

$135.00

15328G-GL Wash Primer 3 component wash

15328G-GL Wash Primer 3 component wash

$259.35

066T W66 Spray & Wipe Cleaner

066T W66 Spray & Wipe Cleaner

$26.25

CCB-39600-4 Silver Connector 5-Foot Quick Drain Hose

CCB-39600-4 Silver Connector 5-Foot Quick Drain Ho

$29.79

LEAR 31-35-36 LH HEATED WINDSH,

LEAR 31-35-36 LH HEATED WINDSH,

$53.00

#099 Solid Film Lubricant: Air Dry /Heat Cure 1 Gallon

#099 Solid Film Lubricant: Air Dry /Heat Cure 1 Ga

$350.00

260T Solvit Citrus Clean

260T Solvit Citrus Clean

$131.25

INHIBITOR: CORROSION,5GL, ONLY SOH AVAILABLE

INHIBITOR: CORROSION,5GL, ONLY SOH AVAILABLE

$0.00

15090T3C2-GL Topcoat light gray enamel Baking

15090T3C2-GL Topcoat light gray enamel Baking

$259.35

CCA-38001 Aluminum Anodized Oil Drain Valve

CCA-38001 Aluminum Anodized Oil Drain Valve

$26.07

SEALANT: TECHKIT 130,MC 238 B-2,24CS, NAFTOSEAL,AIMS 04-05-001

SEALANT: TECHKIT 130,MC 238 B-2,24CS, NAFTOSEAL,AI

$0.00

WINDOW: MAIN,GLASS,RH, EMBRAER LEGACY 600/650

WINDOW: MAIN,GLASS,RH, EMBRAER LEGACY 600/650

$47.00

WINDOW: MAIN,GLASS,LH, EMBRAER LEGACY 600-650

WINDOW: MAIN,GLASS,LH, EMBRAER LEGACY 600-650

$47.00

SEALANT: TECHKIT 130,MC 650 B-1,24CS, NAFTOSEAL,AIMS 04-05-001

SEALANT: TECHKIT 130,MC 650 B-1,24CS, NAFTOSEAL,AI

$0.00

Chemetall Ardrox® Inhibitor Light Brown, 13.5 oz aerosol can

Chemetall Ardrox® Inhibitor Light Brown, 13.5 oz a

$0.00

22750-27038-GL Topcoat 2 component epoxy

22750-27038-GL Topcoat 2 component epoxy

$384.23

CCA-1625- check again

CCA-1625- check again

$21.52

$506.93

PPG PR-1829 Class B Windshield Sealant, 6 oz cartridge

PPG PR-1829 Class B Windshield Sealant, 6 oz cartr

$301.80

Sandstrom D106 Thinner 1USG Metal Can

Sandstrom D106 Thinner 1USG Metal Can

$85.00

SEALANT: 654 SEMKIT,6OZ,

SEALANT: 654 SEMKIT,6OZ,

$116.61

PPG PRC-Desoto® 654 Fuel Tank Sealant PR1826A2-60Z, 6 oz

PPG PRC-Desoto® 654 Fuel Tank Sealant PR1826A2-60Z

$386.56

CCA-2700 Flush Mounted Valves

CCA-2700 Flush Mounted Valves

$32.17

Chemetall ARDROX 2302 Heavy Duty Paint Remover

Chemetall ARDROX 2302 Heavy Duty Paint Remover

$555.04

821F Paint Off Hand Cleaner

821F Paint Off Hand Cleaner

$17.50

Zip-Chem Sur-Prep Ap-1 Adhesion Promoter 1USP Can

Zip-Chem Sur-Prep Ap-1 Adhesion Promoter 1USP Can

$117.80

$356.96

999J L/Orange Cream Hand Cleaner

999J L/Orange Cream Hand Cleaner

$62.50

TW25B 16 Oz Caulk Premium Firearm and Gun Grease- Synthetic Lubricant

TW25B 16 Oz Caulk Premium Firearm and Gun Grease-

$206.19